GREENLINE - sustainable and environmentally friendly
We only use as much material as necessary and as little product packaging as possible. For many products, we do not use any outer packaging. For a variety of articles, you have the choice between conventional packaging and the environmentally friendly GREENLINE packaging consisting of paper or without packaging. For more information visit our project page GREENLINE.
These moulds are made of polycarbonate and have no firm base. The base plate is made of stainless steel and is connected with the mould by magnets. Proceed as follows: Put the mould (with the magnet side facing down) without the base plate on the table. Cut a transfer or structure Sheet to the desired size. Lay the Sheet in the mould. Then put the base plate on. The base plate with the Sheet inside is pressed to the mould by the magnets. Turn the mould and fill it. Never before has it been so easy to make pralines with transfer and structure Sheets.
Professional moulds made of polycarbonate, suitable for making pralines and chooclate hollow bodies. These moulds have been developed for permanent use. They are not comparable with cheap, flexible moulds for hobby confectioners.With proper use and care you will be able to work with these moulds for many years.
Never clean the moulds in the dish washer or with washing-up liquid. If necessary, clean the mould with clear, warm water. Ideally just polish the used mould with cotton before next use.
Size mould: 275x175x24mm
Size piece: 29x29x12mm
Number of pieces: 4x5
Piece weight: approx. 10g
Picture 1 shows a praline made with transfer Sheet Le café.
Manufacturer:
Cake-Masters
Siemensstraße 24
49770 Herzlake
www.cake-masters.com
Passend dazu
Content: 0.05 Litre €93.00 / 1 Litre
Cutsomers also bought
